Kimsuky, a threat group known to be supported by North Korea, has been active since 2013. At first, they attacked North Korea-related research institutes in South Korea before attacking a South Korean energy agency in 2014. Other countries have also become targets of their attack since 2017. [1] The group usually launches spear phishing attacks on the national defense, diplomatic, and academic sectors, defense and media industries, as well as national organizations. Their goal is to exfiltrate internal information and technology from the targets. [2]
After initial access, the Kimsuky threat group usually installs backdoors to control the infected systems or Infostealers to exfiltrate sensitive information within the infected systems. While open-source-based malware such as xRAT (Quasar RAT) or malware developed by the group itself are used in attacks, the group also uses legitimate tools to control the infected system.
It is a characteristic of the Kimsuky group to use these malware alongside various tools that support remote control in their attack process. The most commonly used method for remote control is Remote Desktop Protocol (RDP). In environments without RDP, the open-source tool RDP Wrapper is installed. Once RDP is installed, a user account is added for RDP access, or additional pieces of malware are used to conceal the added account and configure multiple RDP sessions. [3] [4]
Aside from RDP, there have been cases where TinyNuke (public malware) or TightVNC (open-source VNC tool) were customized and used in attacks. VNC, also known as Virtual Network Computing, is a screen-sharing system that remotely controls other computers like RDP. [5] Besides these, there are also cases where Chrome Remote Desktop, supported by the Google Chrome web browser, was used to control the infected system. [6]
Figure 1. Malware that installs Chrome Remote DesktopIn this post, we will cover the latest cases where the Kimsuky group installed BabyShark through presumed spear phishing attacks before installing various RDP-related malware strains. Tools used in the attacks have similar features to those in past cases, but from their PDB information, it is deemed that they have been created recently to be used in attacks.
Figure 2. PDB information of the injector malwareBesides these, another new malware was discovered; the name used by the threat actor upon creating the malware was “RevClient”. This malware operates by receiving commands from the threat actor through the C&C server. Depending on the command, it can add user accounts or enable the port forwarding feature.
1. Initial Access
While the initial distribution method has not been confirmed, it is presumed that spear phishing attacks would have been used. There was a history of the file “hwp.bat” being used in the infected system, like the case covered in the ASEC Blog post, “Malicious Batch File (*.bat) Disguised as a Document Viewer Being Distributed (Kimsuky)”. [7] The BAT malware checks for antivirus products using WMIC commands and additionally installs script-type malware.
Figure 3. The hwp.bat file used in attacksAfter the initial infection, the threat actor continuously exfiltrated information from the infected system by changing malware and the C&C server address. Main examples of the malware that were installed include “k.ps1”, a keylogger, and the file “OneNote.vbs” which executes “k.ps1”. The file “k.ps1” saves the logged data in the file “%APPDATA%\k.log”.
Figure 4. Addresses used for uploading the exfiltrated information
Figure 5. Kimsuky group’s keylogger malwareBesides these, “pow.ps1”, a loader malware, and “desktop.r7u”, an encoded data file, were also identified. “pow.ps1” decrypts the file in the path “%APPDATA%\Microsoft\desktop.r7u” and executes it in the memory area. The decrypted file “desktop.r7u” is an injector. If the file “desktop.r3u” exists in the same path, the injector is responsible for decrypting this file and injecting it into “MSBuild.exe”, a legitimate program. While the file could not be procured, in similar attack cases in the past, a decrypted “desktop.r3u” file was xRAT, and the report by Huntress stated that KimJongRAT was used. [8]
Figure 6. The routine of decrypting and injecting desktop.r3u
2. Installing Additional Payloads
Seeing from the fact that the BabyShark C&C server address has been changed after a certain period of time, it could be seen that the threat actor continuously updated BabyShark even after its initial installation. Although information can be collected from the infected system using BabyShark alone, the threat actor additionally installed RDP-related malware afterward.
2.1. Injector
Among the installed malware, “process.exe” is almost identical to the decrypted “desktop.r7u” covered above, which is the injector. Similarities can be seen when comparing the PDB information of the two malware strains.
- PDB information of the decrypted desktop.r7u: H:\Hollow\csharp process hollowing_complete_offset\csharp process hollowing_complete_offset\process\process\obj\x86\Release\process.pdb
- PDB information of process.exe: G:\0726_Rev_hollowing\csharp process hollowing_complete_offset\process\process\obj\x86\Release\process.pdb
A difference is that the decryption target is the file “CustomVerification.DIC” in the %APPDATA% path and that the target process for injection is “powershell_ise.exe”. Although the file “CustomVerification.DIC” could not be identified, it is likely one of the malware that the Kimsuky group frequently uses because there are cases where xRAT was used in attacks around the same time period.
2.2. Changing the RDP Service
Aside from these, the threat actor installed a piece of malware with the name “multiple.exe”. This malware adds user accounts, enables RDP, and also supports multiple sessions. The malware first terminates the RDP service and grants permission to modify “termsrv.dll” which manages said service. Afterward, it changes the file name of “termsrv.dll” to “termsrv.pdb” and then copies the file “termsrv.dll” which already exists in the %APPDATA% path into %SystemDirectory%.
Figure 7. The routine of changing to the patched termsrv.dll to support multiple sessionsOrdinarily in Windows desktop environments, only one session is supported when connecting via RDP, unlike servers. As only one session is supported for one system, even if the user accounts are different, when the threat actor remotely connects to a system, the existing user’s session is terminated. Mimikatz and other malware of the Kimsuky group patch the memory of the currently running RDP service process to bypass this phenomenon.
However, the malware currently being used in attacks used the method of directly swapping out the legitimate “termsrv.dll” file for the patched “termsrv.dll” file. Comparing the “termsrv.dll” file that the threat actor created in advance in the %APPDATA% path with the legitimate “termsrv.dll” file shows that the CDefPolicy::Query() function has been patched.
- CDefPolicy::Query() function routine of the legitimate termsrv.dll file: 39 81 3C 06 00 00 0F 84 E7 43 01 00
- CDefPolicy::Query() function routine of the patched termsrv.dll file: B8 00 01 00 00 89 81 38 06 00 00 90
At this stage, an account named “IIS_USER” is created and added to the admin group to be used as the account to control the infected system. Additionally, when an account is added, it is visible when the user logs in; so, the system user can be aware of the new account. To prevent this, the malware registers the newly created “IIS_USER” to SpecialAccounts, preventing it from being visible even when the user logs in.
Figure 8. Commands to register and conceal a user account- PDB information of multiple.exe – 1: Z:\5-program\multiple\multisession_complete\multisession_complete\Release\x64\Multisession.pdb
- PDB information of multiple.exe – 2: G:\0711_uac_multiple_work\multisession_complete\multisession_complete\x64\Release\Multisession.pdb
2.3. RevClient
RevClient is an RDP-related malware that runs by receiving commands from the C&C server. Depending on the command, it can perform user account-related tasks or port forwarding. The following is the configuration data of RevClient used in attacks. It can be seen that the malware version is “1.0”. Characteristically, it uses the string “ZhengReversePC” as the mutex name. The actual configuration data is included in the string “AllSettings” encrypted in Base64.
Figure 9. Configuration data of RevClientIt is possible to check other configuration data by decrypting the Base64 string.
| Settings | Data |
|---|---|
| Version | “1.0” |
| Mutex | “ZhengReversePC” |
| Host IP | 5.61.59[.]53 |
| Host port | 0 |
| MSTSC (RDP) IP | 127.0.0.2 |
| MSTSC (RDP) port | 3389 |
| Main (C&C) port | 2086 |
The C&C address is made by combining the host IP address and the main port, then a connection is made. Afterward, basic information on the infected system is collected and transferred. Then, settings or commands are received as a response.
- C&C address: 5.61.59[.]53:2086
| Item | Data |
|---|---|
| Signature string | “NAT” |
| Information about the infected system | String obtained by encrypting [User Name]@[PC Name] in Base64 |
| OS information | OS information |
| Version | “1.0” |
| Host port | First, the value is 0, then this can be received from the C&C server. |
The response is separated into four with “;” as the separator, and set items are used for each command. It is estimated that the first response will be the host port number, which is the fourth item, and in subsequent responses, the command number, which is the third item, will be transmitted along with additional data.
| Response | Data |
|---|---|
| User account name | Used for adding or deleting user accounts (encrypted in Base64) |
| User account password | Used for adding user accounts (encrypted in Base64) |
| Command | Command number |
| Host port | Port number for port forwarding |
Figure 10. The routine of executing commands| Command | Data |
|---|---|
| 100 | Start port forwarding |
| 200 | Delete user account |
| 300 | Add and conceal user account |
| 400 | Terminate port forwarding and initialize host port |
| 500 | Terminate port forwarding |
When the command “100” is transmitted, the previously received host port numbers are combined. A connection is made to the address 5.61.59[.]53:(Host Port), then this and 127.0.0.2:3389 are linked. Generally, RDP-related port forwarding tools are used to overcome the fact that threat actors cannot directly access NAT environments from the outside. Thus, a connection is first established to the threat actor’s address through the reverse connection method. Then, a connection is made to the RDP port of the infected system, relaying the two communication lines.
Figure 11. Port forwarding routineAdditionally, RevClient has the NewConcurrentRDPatcher() function implemented, which has features similar to “multiple.exe” above. The difference is that unlike “multiple.exe” which changes the previously patched “termsrv.dll” file, the NewConcurrentRDPatcher() function directly patches and modifies said file according to the Windows version. While there is no routine to execute the NewConcurrentRDPatcher() function, it is deemed that other versions of RevClient would perform this task through a command from the C&C server or in the initialization routine.
Figure 12. RevClient’s RDP patch routine
3. Conclusion
The Kimsuky threat group is continuously abusing RDP to obtain control over infected systems and exfiltrate information. RDP can also be used in the initial access process using brute force and dictionary attacks, or during lateral movement. Because RDP is one of the services that come pre-installed in Windows systems, adequate management is needed to detect or prevent such incidents.
Users must refrain from opening attachments on suspicious emails, and when installing external software, it is recommended to purchase or download them from their official websites. Additionally, users must set complex passwords for their accounts and change them periodically.
Also, V3 must be updated to the latest version to block malware infection in advance. In addition to endpoint security products (V3), sandbox-based APT solutions such as MDS must be implemented to prevent harm from cyberattacks.
AhnLab MDS sandbox detects the malware that patches RDP and activates multiple sessions under the detection name “Execution/MDP.Command.M10645”.
Figure 13. Malware detected by AhnLab MDS
Figure 14. Changes to file ownership detectedFile Detection
– Trojan/Win.Agent.C5502241 (2023.10.08.03)
– Trojan/Win.Injector.C5502245 (2023.10.08.03)
– Backdoor/Win.RevClient.R609964 (2023.10.08.03)
– Trojan/Win.Agent.R5502241 (2023.10.08.03)
– Backdoor/PowerShell.XRatLoader.SC192386 (2023.09.13.00)
– Trojan/VBS.KeylogLoader.SC192383 (2023.09.13.00)
– Keylogger/PowerShell.Agent (2023.09.13.00)
– Data/BIN.Encoded (2023.09.13.00)
Behavior Detection
– Execution/MDP.Command.M10645
AMSI Detection
– Trojan/Win.Injector.C5485760
IOC
MD5
– ad9a3e893abdac7549a7d66ca32142e8 : Keylogger 런쳐 – BabyShark (OneNote.vbs)
– 116a71365b83cc38211ccfc8059b363e : Keylogger – BabyShark (k.ps1)
– c8d589ac5c872b12e502ec1fc2fee0c7 : Loader – BabyShark (pow.ps1)
– 0d6717c3fa713c5f5f5cb0539b94b84f : Injector – BabyShark (desktop.r7u)
– 0d691673af913dc0942e55548f6e2e4e : Injector (process.exe)
– 2dbe8e89310b42e295bfdf3aad955ba9 : RDP Pacher (multiple.exe)
– 7313dc4d9d6228e442fc6ef9ba5a1b9a : RDP Pacher (multiple.exe)
– be2f73a637258aa872bdf548daf55336 : RevClient (RevClient.exe)
– 02804d632675b2a3711e19ef217a2877 : RevClient (RevClient_x86.exe)
C&C
– hxxps://onessearth[.]online/up/upload_dotm.php : BabyShark
– hxxps://powsecme[.]co/up/upload_dotm.php : BabyShark
– 5.61.59[.]53:2086 : RevClient
AhnLab MDS detects and responds to unknown threats by performing sandbox-based dynamic analysis. For more information about the product, please visit our official website.
The post Kimsuky Threat Group Uses RDP to Control Infected Systems appeared first on ASEC BLOG.
Article Link: https://asec.ahnlab.com/en/57873/